Electric Stacker is an industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and Other industries, as well as ports, railways, freight yards, warehouses.
1. Mast which can provide wide field of vision
The hydraulic cylinder is located at the right-middle side of the stacker, thus providing a wider field of vision for the operator.
2. Double speed switch
The speed of this electric stacker can be freely switched between normal speed and slow speed. The operators can choose slow speed to realize slow moving of the stacker. This is especially suitable for new operators who are not familiar with the operation of this equipment.
3. Lateral vertical moving
The stacker can move without pulling the handle. By pressing down the straight moving button, the stacker can move slowly. This is suitable for working in narrow aisles and other limited spaces.
4. Adjustable balance and supporting wheel
The adjustable balance wheel features strong stability, so that the operation can be more stable, safer and more reliable.
5. Solid channel steel mast
Compared with the bending finished iron metal mast, the channel steel mast is more solid and durable, more stable and safer.
6. Intelligent sleep mode
When the stacker is not in use for long time, the intelligent sleep mode will be automatically initiate to save battery power and cost.
7. Handle of the best one-step length
The long operating handle adopts ergonomic design. The max ground clearance is 1305mm and the min ground clearance is 715mm, so that it quite easy to use. During normal operation, the operators should be one-step away from the stacker, so that their feet will not get caught by the wheel, thus ensuring safety of the operators.
8. Split type mast
The fabricated connection of the mast and stacker frame can realize easy installation and changing of the mast as necessary. The working device and moving device are easily disassembled and changed.
9. Beautiful and tiny appearance
The base design: the front base is 600mm in length so that it is flexible and suitable for working in narrow channels. It is the ideal choice for trans-floor working.
